Abstract
In the last decades, new flexible manufacturing processes have been developed to face the demands, by many industrial fields, for highly customized complex functional parts. The peculiar design of these components often overcomes conventional sheet metal and bulk metal forming processes capabilities. In order to face this issue, new hybrid techniques, capable of exploit key advantages of different processes, have to be developed. In this study, a method to obtain sheet-bulk joints, based on the Linear Friction Welding process, is proposed. The feasibility of the technique was investigated through an experimental campaign carried out with varying pressure and oscillation frequency using AA6082-T6 aluminum alloy. The main mechanical and metallurgical properties of the produced joints, including typical material flow defects, were highlighted. It was found that sound hybrid sheet-bulk joints can be produced by the proposed approach. Finally, it was highlighted how the height of the weld center zone plays a key role on the mechanical properties of the produced joints.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig2_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig3_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig5_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig6_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig7_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig8_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig9_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig10_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig11_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig12_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12289-019-01516-0/MediaObjects/12289_2019_1516_Fig13_HTML.png)
Similar content being viewed by others
References
Lauwers B, Klocke F, Klink A et al (2014) Hybrid processes in manufacturing. CIRP Ann - Manuf Technol. https://doi.org/10.1016/j.cirp.2014.05.003
Ahuja B, Schaub A, Karg M et al (2014) Develo** LBM process parameters for Ti-6Al-4V Thin Wall structures and determining the corresponding mechanical characteristics. Phys Procedia 56:90–98. https://doi.org/10.1016/J.PHPRO.2014.08.102
Merklein M, Löffler M, Schneider T (2015) Plastic flow and its control in sheet-bulk metal forming of thin-walled functional components. CIRP Ann - Manuf Technol. https://doi.org/10.1016/j.cirp.2015.04.078
Löffler M, Schulte R, Freiburg D et al (2019) Control of the material flow in sheet-bulk metal forming using modifications of the tool surface. Int J Mater Form 12:17–26. https://doi.org/10.1007/s12289-018-1399-2
Schaub A, Ahuja B, Butzhammer L et al (2016) Additive manufacturing of functional elements on sheet metal. Phys Procedia 83:797–807. https://doi.org/10.1016/j.phpro.2016.08.082
Papke T, Dubjella P, Butzhammer L et al (2018) Influence of a bending operation on the bonding strength for hybrid parts made of Ti-6Al-4V. Procedia CIRP 74:290–294. https://doi.org/10.1016/j.procir.2018.08.113
Schaub A, Juechter V, Singer RF, Merklein M (2014) Characterization of hybrid components consisting of SEBM additive structures and sheet metal of alloy Ti-6Al-4V. Key Eng Mater 611–612:609–614. https://doi.org/10.4028/www.scientific.net/KEM.611-612.609
Vairis Frost, M. A, Vairis A, Frost M (1998) High frequency linear friction welding of a titanium alloy. Wear 217:117–131 . doi: Doi https://doi.org/10.1016/S0043-1648(98)00145-8
Vairis A, Frost M (1999) On the extrusion stage of linear friction welding of Ti 6Al 4V. Mater Sci Eng A 271:477–484. https://doi.org/10.1016/S0921-5093(99)00449-9
Vairis A, Frost M (1998) High frequency linear friction welding of a titanium alloy. Wear 217:117–131 . doi: Doi https://doi.org/10.1016/S0043-1648(98)00145-8
McAndrew AR, Colegrove PA, Bühr C et al (2018) A literature review of Ti-6Al-4V linear friction welding. Prog Mater Sci 92:225–257
Fratini Buffa, G., Cammalleri, M., Campanella, D. L (2013) On the linear friction welding process of aluminum alloys: experimental insights through process monitoring. CIRP Ann - Manuf Technol 62:295–298
Kelly MR, Schmid SR, Adams DC et al (2019) Experimental investigation of linear friction welding of AISI 1020 steel with pre-heating. J Manuf Process 39:26–39. https://doi.org/10.1016/j.jmapro.2019.01.038
Ma TJ, Tang LF, Li WY et al (2018) Linear friction welding of a solid-solution strengthened Ni-based superalloy: microstructure evolution and mechanical properties studies. J Manuf Process 34:442–450. https://doi.org/10.1016/j.jmapro.2018.06.011
Taban E, Gould JE, Lippold JC (2010) Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel: properties and microstructural characterization. Mater Des. https://doi.org/10.1016/j.matdes.2009.12.010
Wanjara P, Dalgaard E, Trigo G et al (2011) Linear friction welding of Al–cu: part 1 – process evaluation. Can Metall Q 50:350–359. https://doi.org/10.1179/000844311X13112418194644
Rao HM, Ghaffari B, Yuan W et al (2016) Effect of process parameters on microstructure and mechanical behaviors of friction stir linear welded aluminum to magnesium. Mater Sci Eng A 651:27–36. https://doi.org/10.1016/j.msea.2015.10.082
Buffa G, Cammalleri M, Campanella D et al (2017) Linear friction welding of dissimilar AA6082 and AA2011 aluminum alloys: microstructural characterization and design guidelines. Int J Mater Form 10:307–315. https://doi.org/10.1007/s12289-015-1279-y
Fratini L, Buffa G, Campanella D, La Spisa D (2012) Investigations on the linear friction welding process through numerical simulations and experiments. Mater Des 40:285–291. https://doi.org/10.1016/j.matdes.2012.03.058
Buffa G, Campanella D, Pellegrino S, Fratini L (2016) Weld quality prediction in linear friction welding of AA6082-T6 through an integrated numerical tool. J Mater Process Technol 231:389–396. https://doi.org/10.1016/j.jmatprotec.2016.01.012
Vairis Frost, M. A (1999) On the extrusion stage of linear friction welding of Ti 6a1 4V. Mater Sci Eng A 271:477–484
Baffari D, Buffa G, Campanella D et al (2019) Single block 3D numerical model for linear friction welding of titanium alloy. Sci Technol Weld Join 24:130–135. https://doi.org/10.1080/13621718.2018.1492211
McAndrew AR, Colegrove PA, Addison AC et al (2015) Modelling the influence of the process inputs on the removal of surface contaminants from Ti-6Al-4V linear friction welds. Mater Des 66:183–195. https://doi.org/10.1016/j.matdes.2014.10.058
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Buffa, G., Baffari, D., Barcellona, A. et al. Mechanical and metallurgical characterization of AA6082-T6 sheet-bulk joints produced through a linear friction welding based approach. Int J Mater Form 13, 383–391 (2020). https://doi.org/10.1007/s12289-019-01516-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12289-019-01516-0