Abstract
FeCl3-modified Co–Ce oxides catalysts were prepared by a glycine–nitrate combustion method followed by FeCl3 impregnation, and Hg0 removal efficiencies of the obtained samples were investigated in a laboratory-scale fixed-bed system. Effect of factors (including FeCl3 loading value, reaction temperature and flue gas compositions) on mercury removal over FeCl3-modified Co–Ce oxides catalyst and its co-benefit of NO conversion were examined. Results showed that the FeCl3-modified Co–Ce oxides catalysts presented high mercury removal activities below 300 °C in the absence of HCl. The 8% FeCl3–CC could remove >90% Hg0 at optimum temperature (150 °C) in N2 and achieve a Hg0 removal efficiency of about 86% and a simultaneous NO conversion efficiency of about 48.5% at 250 °C in the N2 + O2 atmosphere. NO would slightly suppress the mercury removal but significantly improve it when NO was added together with O2. SO2 exhibited an obvious negative effect on the removal of mercury, but H2O slightly inhibited it. This inhibition could be attributed to the competitive adsorption. The characterization results (BET, XRD, SEM, XPS and TG) demonstrated that FeCl3 was successfully introduced to the Co–Ce oxides and manifested the formation of Co3O4–CeO2 composites. XPS and Hg-TPD results indicated that both active Cl species and oxygen species contributed to the oxidation removal of elemental mercury over FeCl3-modified Co–Ce oxides, which followed the Mars–Maessen mechanism.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig1_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig7_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig8_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig9_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig10_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-017-0250-4/MediaObjects/11696_2017_250_Fig11_HTML.gif)
Similar content being viewed by others
References
Abdelrazek EM (2007) Influence of FeCl3 filler on the structure and physical properties of polyethyl-methacrylate films. Phys B 400:26–32. doi:10.1016/j.physb.2007.06.013
Allen GC, Hallam KR (1996) Characterization of the spinels MXCo1-XFe2O4 (M = Mn, Fe or Ni) using X-ray photoelectron spectroscopy. Appl Surf Sci 93:25–30. doi:10.1016/0169-4332(95)00186-7
Cai W, Zhong Q, Zhao W, Bu YF (2014) Focus on the modified CeXZr1-XO2 with the rigid benzene-multi-carboxylate ligands and its catalysis in oxidation of NO. Appl Catal B Environ 158–159:258–268. doi:10.1016/j.apcatb.2014.04.022
Descostes M, Mercier F, Thromat N, Beaucaire C, Gautier-Soyer M (2000) Use of XPS in the determination of chemical environment and oxidation state of iron and sulfur samples: constitution of a data basis in binding energies for Fe and S reference compounds and applications to the evidence of surface species of an oxidized pyrite in a carbonate medium. Appl Surf Sci 165:288–302. doi:10.1016/S0169-4332(00)00443-8
Dowd WJO’, Hargis RA, Granite EJ, Pennline HW (2004) Recent advances in mercury removal technology at the National Energy Technology Laboratory. Fuel Process Technol 85:533–548. doi:10.1016/j.fuproc.2003.11.007
Fernández-Miranda N, Lopez-Anton MA, Díaz-Somoano M, Martínez-Tarazona MR (2014) Effect of oxy-combustion flue gas on mercury oxidation. Environ Sci Technol 48:7164–7170. doi:10.1021/es500967d
Granite EJ, Pennline HW, Hargis RA (2002) Photochemical removal of mercury from flue gas. Ind Eng Chem Res 41:5470–5476. doi:10.1021/ie020251b
Guo Q, Liu Y (2008) MnOx modified Co3O4-CeO2 catalysts for the preferential oxidation of CO in H2-rich gases. Appl Catal B Environ 82:19–26. doi:10.1016/j.apcatb.2008.01.007
He J, Reddy GK, Thiel SW, Smirniots PG, Pinto NG (2011) Ceria-modified manganese oxide/titania materials for removal of elemental and oxidized mercury from flue gas. J Phys Chem C 115:24300–24309. doi:10.1021/jp208768p
He J, Reddy GK, Thiel SW, Smirniotics PG, Pinto NG (2013) Simultaneous removal of elemental mercury and NO from flue gas using CeO2 modified MnOx/TiO2 materials. Energy Fuel 27:4832–4839. doi:10.1021/ef400718n
Hutson ND, Attwood BC, Scheckel KG (2007) XAS and XPS characterization of mercury binding on brominated activated carbon. Environ Sci Technol 41:1747–1752. doi:10.1021/es062121q
Ji L, Sreekanth PM, Smirniotis PG, Thiel SW, Pinto NG (2008) Manganese oxide/titania materials for removal of NOx and elemental mercury from flue gas. Energy Fuel 22:2299–2306. doi:10.1021/ef700533q
Kang M, Song MW, Lee CH (2003) Catalytic carbon monoxide oxidation over CoOx/CeO2 composite catalysts. Appl Catal A Gen 251:143–156. doi:10.1016/S0926-860X(03)00324-7
Kim MH, Ham SW, Lee JB (2010) Oxidation of gaseous elemental mercury by hydrochloric acid over CuCl2/TiO2-based catalyst in SCR process. Appl Catal B Environ 99:272–278. doi:10.1016/j.apcatb.2010.06.032
Lee SH, Rhim YJ, Cho SP, Baek JI (2006) Carbon-based novel sorbent for removing gas-phase mercury. Fuel 85:219–226. doi:10.1016/j.fuel.2005.02.030
Lee SS, Lee JY, Keener TC (2009) Bench-scale studies of in-duct mercury capture using cupric chloride-impregnated carbons. Environ Sci Technol 43:2957–2962. doi:10.1021/es801943t
Li Y, Murphy PD, Wu CY, Powers KW, Bonzongo JJ (2008) Development of silica/vanadia/titania catalysts for removal of elemental mercury from coal-combustion flue gas. Environ Sci Technol 42:5304–5309. doi:10.1021/es8000272
Li HL, Li Y, Wu CY, Zhang JY (2011) Oxidation and capture of elemental mercury over SiO2-TiO2-V2O5 catalysts in simulated low-rank coal combustion flue gas. Chem Eng J 169:186–193. doi:10.1016/j.cej.2011.03.003
Li HL, Wu CY, Li Y, Li LQ, Zhao YC, Zhang JY (2012) Role of the flue gas components in mercury oxidation over TiO2 supported MnOX-CeO2 mixed-oxide at low temperature. J Hazard Mater 243:117–123. doi:10.1016/j.jhazmat.2012.10.007
Li X, Liu ZY, Kim J, Lee JY (2013) Heterogeneous catalytic reaction of elemental mercury vapor over cupric chloride for mercury emissions control. Appl Catal B Environ 132–133:401–407. doi:10.1016/j.apcatb.2012.11.031
Li HH, Hu JJ, Wang H (2016) Catalytic oxidation removal of gaseous elemental mercury in flue gas over niobium-loaded catalyst. Can J Chem Eng 94:1486–1494. doi:10.1002/cjce.22516
Li HH, Wang SK, Wang X, Hu JJ (2017a) Activity of CuCl2-modified cobalt catalyst supported on Ti-Ce composite for simultaneous catalytic oxidation of Hg0 and NO in a simulated pre-sco process. Chem Eng J 316:1103–1113. doi:10.1016/j.cej.2017.02.052
Li HH, Wang SK, Wang X, Tang N, Pan SW, Hu JJ (2017b) Comparative study of Co/TiO2, Co-Mn/TiO2 and Co-Mn/Ti-Ce catalysts for oxidation of elemental mercury in flue gas. Chem Pap. doi:10.1007/s11696-017-0152-5
Li HH, Wang SK, Wang X, Tang N, Pan SW, Hu JJ (2017c) Catalytic oxidation of Hg0 in flue gas over Ce modified TiO2 supported Co-Mn catalysts: characterization, the effect of gas composition and co-benefit of NO conversion. Fuel 202:470–482. doi:10.1016/j.fuel.2017.04.071
Lim DH, Wilcox J (2013) Heterogeneous mercury oxidation on Au (111) from first principles. Environ Sci Technol 47:8515–8522. doi:10.1021/es400876e
Liu Y, Wang YJ, Wang HQ, Wu ZB (2011) Catalytic oxidation of gas-phase mercury over Co/TiO2 catalysts prepared by sol-gel method. Catal Commun 12:1291–1294. doi:10.1016/j.catcom.2011.04.017
Liu HM, Wei GL, Xu Z, Liu P, Li Y (2016a) Quantitative analysis of Fe and Co in Co-substituted magnetite using XPS: the application of non-linear least squares fitting (NLLSF). Appl Surf Sci 389:438–446. doi:10.1016/j.apsusc.2016.07.146
Liu T, Man CY, Guo X, Zheng CG (2016b) Experimental study on the mechanism of mercury removal with Fe2O3 in the presence of halogens: role of HCl and HBr. Fuel 173:209–216. doi:10.1016/j.fuel.2016.01.054
Lopez-Anton MA, Yuan Y, Perry R, Maroto-Valer MM (2010) Analysis of mercury species present during coal combustion by thermal desorption. Fuel 89:629–634. doi:10.1016/j.fuel.2009.08.034
Lu DY, Granatstein DL, Rose DJ (2004) Study of mercury speciation from simulated coal gasification. Ind Eng Chem Res 43:5400–5404. doi:10.1021/ie034121u
Mars P, Maessen JGH (1968) The mechanism and the kinetics of sulfur dioxide oxidation on catalysts containing vanadium and alkali oxides. J Catal 10:1–12. doi:10.1016/0021-9517(68)90216-9
Megarajan SK, Rayalu S, Teraoka Y, Labhsetwar N (2014) High NO oxidation catalytic activity on non-noble metal based cobalt-ceria catalyst for diesel soot oxidation. J Mol Catal A Chem 385:112–118. doi:10.1016/j.molcata.2014.01.026
Negreira AS, Wilcox J (2013a) DFT study of Hg oxidation across vanadia-titania SCR catalyst under flue gas conditions. J Phys Chem C 117:1761–1772. doi:10.1021/jp310668j
Negreira AS, Wilcox J (2013b) Role of WO3 in the Hg oxidation across the V2O5-WO3-TiO2 SCR catalyst: a DFT study. J Phys Chem C 117:24397–24406. doi:10.1021/jp407794g
Obiri S, Dodoo DK, Armah FA, Essumang DK, Cobbina SJ (2010) Evaluation of lead and mercury neurotoxic health risk by resident children in the Obuasi municipality, Ghana. Environ Toxicol Pharmacol 29:209–212. doi:10.1016/j.etap.2010.01.001
Pavlish JH, Sondreal EA, Mann MD, Olson ES, Galbreath KC, Laudal DL, Benson SA (2003) Status review of mercury control options for coal fired power plants. Fuel Process Technol 82:89–165. doi:10.1016/S0378-3820(03)00059-6
Pirrone N, Cinnirella S, Feng X, Finkelman RB, Friedli HR, Leaner J, Mason R, Mukherjee AB, Stracher GB, Streets DG, Telmer K (2010) Global mercury emissions to the atmosphere from anthropogenic and natural sources. Atmos Chem Phys 10:5951–5964. doi:10.5194/acp-10-5951-2010
Presto AA, Granite EJ (2008) Noble metal catalysts for mercury oxidation in utility flue gas. Platinum Metals Rev 52:144–154. doi:10.1595/147106708x319256
Presto AA, Granite EJ, Karash A, Hargis RA, DowdO’ WJ, Pennline HW (2006) A kinetic approach to the catalytic oxidation of mercury in flue gas. Energy Fuel 20:1941–1945. doi:10.1021/ef060207z
Qi H, Xu WQ, Wang J, Tong L, Zhu TY (2015) Hg0 removal from flue gas over different zeolites modified by FeCl3. J Environ Sci 28:110–117. doi:10.1016/j.jes.2014.05.050
Reddy BM, Khan A, Yamada Y, Kobayashi T, Loridant S, Volta JC (2003) Structural characterization of CeO2-TiO2 and V2O5/CeO2-TiO2 catalysts by Raman and XPS techniques. J Phys Chem B 107:5162–5167. doi:10.1021/jp0344601
Rupp EC, Wilcox J (2014) Mercury chemistry of brominated activated carbons-packed-bed breakthrough experiments. Fuel 117:351–353. doi:10.1016/j.fuel.2013.09.017
Scala F, Cimino S (2015) Elemental mercury capture and oxidation by a regenerable manganese-based sorbent: the effect of gas composition. Chem Eng J 278:134–139. doi:10.1016/j.cej.2014.11.094
Scala F, Anacleria C, Cimino S (2013) Characterization of a regenerable sorbent for high temperature elemental mercury capture from flue gas. Fuel 108:13–18. doi:10.1016/j.fuel.2010.12.028
Tan Z, Su S, Qiu J, Kong F, Wang Z, Hao F, **ang J (2012) Preparation and characterization of Fe2O3-SiO2 composite and its effect on elemental mercury removal. Chem Eng J 195–196:218–225. doi:10.1016/j.cej.2012.04.083
Tang XL, Gao FY, **ang Y, Yi HH, Zhao SZ (2015) Low temperature catalytic oxidation of nitric oxide over the Mn-CoOX catalyst modified by nonthermal plasma. Catal Commun 64:12–17. doi:10.1016/j.catcom.2015.01.027
Todorova S, Kolev H, Holgado J, Kadinov PG, Bonev C, Pereñíguez R, Caballero A (2010) Complete n-hexane oxidation over supported Mn-Co catalysts. Appl Catal B Environ 94:46–54. doi:10.1016/j.apcatb.2009.10.019
Uddin MA, Ozaki M, Sasaoka E, Wu SJ (2009) Temperature-programmed decomposition desorption of mercury species over activated carbon sorbents for mercury removal from coal-derived fuel gas, Energ. Fuel 23:4710–4716. doi:10.1021/ef801068z
Wang PY, Su S, **ang J, Cao F, Sun LS, Hu S, Lei SY (2013) Catalytic oxidation of Hg0 by CuO-MnO2-Fe2O3/γ-Al2O3 catalyst. Chem Eng J 225:68–75. doi:10.1016/j.cej.2013.03.060
Wang YY, Shen BX, He C, Yue SJ, Wang FM (2015) Simultaneous removal of NO and Hg0 from flue gas over Mn-Ce/TiPILCs. Environ Sci Technol 49:9355–9363. doi:10.1021/acs.est.5b01435
Wilcox J, Rupp EC, Ying SC, Lee DH, Negreira AS, Kerchofer A, Feng F, Lee K (2012) Mercury adsorption and oxidation in coal combustion and gasification processes. Int J Coal Geol 90:4–20. doi:10.1016/j.coal.2011.12.003
Xu WQ, Wang HR, Zhu TY, Kuang JY, **g PF (2013) Mercury removal from coal combustion flue gas by modified fly ash. J Environ Sci 25:393–398. doi:10.1016/S1001-0742(12)60065-5
Yang SJ, Guo YF, Yan NQ, Wu DQ, He HP, **e JK, Qu Z, Jia JP (2011) Remarkable effect of the incorporation of titanium on the catalytic activity and SO2 poisoning resistance of magnetic Mn-Fe spinel for elemental mercury capture. Appl Catal B Environ 101:698–708. doi:10.1016/j.apcatb.2010.11.012
Yang JP, Zhao YC, Zhang JY, Zheng CG (2016) Removal of elemental mercury from flue gas by recyclable CuCl2 modified magnetospheres catalyst from fly ash: part 1. Identification of involved reaction mechanism. Fuel 167:366–374. doi:10.1016/j.fuel.2015.08.012
Yu Y, Zhong Q, Cai W, Ding J (2015) Promotional effect of N-doped CeO2 supported CoOX catalysts with enhanced catalytic activity on NO oxidation. J Mol Catal A Chem 398:344–352. doi:10.1016/j.molcata.2015.01.002
Zhang AC, Zheng WW, Song J, Hu S, Liu ZC, **ang J (2014a) Cobalt manganese oxides modified titania catalysts for oxidation of elemental mercury at low flue gas temperature. Chem Eng J 236:29–38. doi:10.1016/j.cej.2013.09.060
Zhang MY, Li CT, Qu L, Fu MF, Zeng GM, Fan CZ, Ma JF, Zhan FM (2014b) Catalytic oxidation of NO with O2 over FeMnOX/TiO2: effect of iron and manganese oxides loading sequences and the catalytic mechanism study. Appl Surf Sci 300:58–65. doi:10.1016/j.apsusc.2014.02.002
Zhao B, Yi HH, Tang XL, Li Q, Liu DD, Gao FY (2016) Copper modified activated coke for mercury removal from coal-fired flue gas. Chem Eng J 286:585–593. doi:10.1016/j.cej.2015.10.107
Zhou X, Xu WQ, Wang HR, Tong L, Qi H, Zhu TY (2014) The enhance effect of atomic Cl in CuCl2/TiO2 catalyst for Hg0 catalytic oxidation. Chem Eng J 254:82–87. doi:10.1016/j.cej.2014.05.093
Acknowledgements
The authors would like to thank for the support from Test Center of Wuhan University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, H., Wang, S., Wang, X. et al. FeCl3-modified Co–Ce oxides catalysts for mercury removal from coal-fired flue gas. Chem. Pap. 71, 2545–2555 (2017). https://doi.org/10.1007/s11696-017-0250-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11696-017-0250-4