Abstract
A liquid treatment method by electromagnetic stirring was applied to a hyper-eutectic Al-15wt pctSi-4wt pctCu-3wt pctNi alloy for the piston manufacturing with diecasting process in order to improve high-temperature mechanical properties of the piston heads. The mechanical properties, such as hardness, high-temperature tensile stress, thermal expansion, and high-temperature relative wear resistance, were estimated using the specimens taken from the liquid-treated diecast products, and the results were compared with those of a conventional metal-mold-cast piston.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11663-014-0271-0/MediaObjects/11663_2014_271_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11663-014-0271-0/MediaObjects/11663_2014_271_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11663-014-0271-0/MediaObjects/11663_2014_271_Fig3_HTML.gif)
Similar content being viewed by others
References
E.L Rooy: AFS Trans., 1972, vol. 80, pp. 421–26.
J. E. Hatch: Aluminum: Properties and Physical Metallurgy, ASM Metals Park, Ohio, 1984.
Z. Fan, S. Ji, and M.J. Bevis: Proceedings of 6th International Conference on Semi-Solid Processing of Alloys and Composites, Turin, Italy, 2000, pp. 61–66.
Z. Fan: Int. Mater. Rev., 2002, vol. 47, pp. 49-85.
T. Haga and P. Kapranos: J. Mater. Process. Technol., 2002, vol. 130-131, pp. 594-598.
M. C. Flemings: Metall. Sci. Technol., 2000, vol. 18, pp. 3-4.
R. A. Martinez and M. C. Flemings: Metall. Mater. Trans. A, 2005, vol. 36, pp. 2205-2210.
H. Jung, N. Mangelinck-Noel, H. Nguyen-Thi, N. Bergeon, B. Billia, A. Buffet, G. Reinhart, T. Schenk and J. Baruchel: Int. J. Cast Met. Res., 2009, vol. 22, pp. 1-4.
J. G. Sim, J. Y. Moon, J. M. Kim and C. P. Hong: Solid State Phenomena, 2006, vol. 116-117, pp. 509-512.
J. G. Sim, Y. S. Jang, J. Y. Moon, J. M. Kim, K. H. Min and C. P. Hong: ISIJ Int., 2009, vol. 49, pp. 1700-1709.
C. P. Hong and J. M. Kim: Solid State Phenomena, 2006, vol. 116-117 pp. 44-53.
Y. S. Jang, B. H. Choi and C. P. Hong: ISIJ INT., 2013, vol. 53, pp. 468-475.
Y. S. Jang, B. H. Choi and C. P. Hong: Mater. Trans., 2014, vol. 55, pp. 693-699.
A. A. Fahmy and A. N. Ragai: J. of Appl. Physics, 1970, vol. 41, pp. 5108-5111.
N. A. Belov, D. G. Eskin and N. N. Avxentieva: Acta Mater., 2005, vol. 53, pp. 4709-4722.
B.H. Choi, Y.S. Jang, J.G. Sim, H.S. Kim and C.P. Hong: ISIJ Int., 2013, vol. 53, pp. 502-510.
F. C. R. Hernandez and J. H. Sokolowski: J. Alloys Compd. 2006, vol. 426, pp. 205-212.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted July 14, 2014.
Rights and permissions
About this article
Cite this article
Jang, Y., Choi, B., Kang, B. et al. Effects of Electromagnetic Stirring on the Microstructure and High-Temperature Mechanical Properties of a Hyper-eutectic Al-Si-Cu-Ni Alloy. Metall Mater Trans B 46, 7–11 (2015). https://doi.org/10.1007/s11663-014-0271-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11663-014-0271-0