Log in

Effect of Electrodeposition Methods of Cuprous Oxide on Antibacterial Properties of Concrete

  • Cementitious Materials
  • Published:
Journal of Wuhan University of Technology-Mater. Sci. Ed. Aims and scope Submit manuscript

Abstract

Three types of electrodeposition, DC electrodeposition, low-frequency pulsed electrodeposition and high-frequency pulsed electrodeposition, were used to deposit cuprous oxide on the concrete surface to improve the antibacterial properties of concrete. The effects of pulse deposition frequency on the antibacterial property of concrete were studied using sulfate-reducing bacteria (SRB) and Escherichia coli (E. coli) as model bacteria. The bacterial concentration and the antibacterial rate were measured to evaluate the antibacterial performance of concrete. The effects of different deposition methods on the elemental content of copper and the amount of copper ions exuded were studied. XRD and SEM were used to analyze the microstructure of the deposited layers. The experimental results show that the concrete treated by electrodeposition exhibited good antibacterial properties against SRB and E. coli. The antibacterial effect of cuprous oxide deposited on concrete by pulse method was better than that by direct current (DC) method. The antibacterial rate of concrete was positively correlated with the exudation rate of copper ion. As the pulse frequency increased, the deposits content on the surface was increased with an accompanying improvement in the antibacterial property. Besides, the pulsed current had an indiscernible effect on the composition of the sediments, which were all mainly composed of Cu2O, but the morphology of the Cu2O differed greatly. Cubic octahedral cuprous oxide had better antibacterial properties with the highest copper ion leaching rate compared with cubic and spherical cuprous oxide.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

References

  1. Wu M, Wang T, Wu K, et al. Microbiologically Induced Corrosion of Concrete in Sewer Structures: A Review of the Mechanisms and Phenomena[J]. Construction and Building Materials, 2020, 239: 117813

    Article  CAS  Google Scholar 

  2. Wang T, Wu K, Kan L, et al. Current Understanding on Microbiologically Induced Corrosion of Concrete in Sewer Structures: A Review of the Evaluation Methods and Mitigation Measures[J]. Construction and Building Materials, 2020, 247: 118539

    Article  Google Scholar 

  3. Liu BS, Tong Y, Duan HR. Mitigation Measures for Microbial Corrosion of Concrete in Sewage Pipes[J]. Science and Technology Innovation, 2021(26): 59–60

  4. He Y, Zhang T, Wang H, et al. Research Progress of Microbial Corrosion Fungicides[J]. Chinese Journal of Corrosion and Protection, 201, 41(06): 748–756

  5. Pang H, Gao F, Lu Q. Morphology Effect on Antibacterial Activity of Cuprous Oxide[J]. Chemical Communications, 2009: 1 076–1 078

  6. El SAM, Abd EM, Azzam AM, et al. Synthesis of Cuprous Oxide Epoxy Nanocomposite as an Environmentally Antimicrobial Coating[J]. International Journal of Biological Macromolecules, 2016, 89: 190–197

    Article  Google Scholar 

  7. Vaidya S, Allouche EN. Electrokinetically Deposited Coating for Increasing the Service Life of Partially Deteriorated Concrete Sewers[J]. Construction and Building Materials, 2010, 24: 2 164–2 170

    Article  Google Scholar 

  8. Haile T, NakhL AG, Allouche E, et al. Evaluation of the Bactericidal Characteristics of Nano-copper Oxide or Functionalized Zeolite Coating for Bio-corrosion Control in Concrete Sewer Pipes[J]. Corrosion Science, 2010, 52: 45–53

    Article  CAS  Google Scholar 

  9. Modaresi ZK, Bakhtiari F, Darezereshki E, et al. Electrodeposition of Cu2O Particles on Reinforced Concrete Substrate[J]. Journal of Industrial and Engineering Chemistry, 2015, 24: 140–147

    Article  CAS  Google Scholar 

  10. Septina W, Ikeda S, Khan MA, et al. Potentiostatic Electrodeposition of Cuprous Oxide Thin Films for Photovoltaic Applications[J]. Electrochimica Acta, 2011, 56: 4 882–4 888

    Article  CAS  Google Scholar 

  11. Bijani S, Schrebler R, Dalchiele EA, et al. Study of the Nucleation and Growth Mechanisms in the Electrodeposition of Micro- and Nanostructured Cu2O Thin Films[J]. Journal of Physical Chemistry C, 2011, 115: 21 373–21 382

    Article  CAS  Google Scholar 

  12. Zhang S, Peng B, Yang S, et al. The Influence of the Electrodeposition Potential on the Morphology of Cu2O/TiO2 Nanotube Arrays and Their Visible-light-driven Photocatalytic Activity for Hydrogen Evolution[J]. International Journal of Hydrogen Energy, 2013, 38: 13 866–13 871

    Article  CAS  Google Scholar 

  13. Osherov A, Zhu C, Panzer MJ. Role of Solution Chemistry in Determining the Morphology and Photoconductivity of Electrodeposited Cuprous Oxide Films[J]. Chemistry of Materials, 2013, 25: 692–698

    Article  CAS  Google Scholar 

  14. Zhu C, Osherov A, Panzer MJ. Surface Chemistry of Electrodeposited Cu2O Films Studied by XPS[J]. Electrochimica Acta, 2013, 111: 771–778

    Article  CAS  Google Scholar 

  15. Siegfried MJ, Choi KS. Electrochemical Crystallization of Cuprous Oxide with Systematic Shape Evolution[J]. Advanced Materials, 2004, 16: 1 743

    Article  CAS  Google Scholar 

  16. Yang Y, Li Y, Pritzker M. Control of Cu2O Film Morphology Using Potentiostatic Pulsed Electrodeposition[J]. Electrochimica Acta, 2016, 213: 225–235

    Article  CAS  Google Scholar 

  17. Hu F, Hu Q, Liu C, et al. Effect of Solution pH on Electrodeposition of Cuprous Oxide Films[J]. Electroplating and Finishing, 2010, 29(6): 4

    Google Scholar 

  18. Zhu J. Corrosion of Reinforced Concrete by Sulfate-reducing Bacteria[J]. Total Corrosion Control, 2010, 024(008): 46–48

    Google Scholar 

  19. Wang SB, He JL, Liu Y, et al. Coupling Analysis of Antibiotic Resistance and Metal Tolerance of Escherichia Coli in Sewage River Sludge[J]. Journal of Environmental Science, 2020, 40(5): 1 734–1 744

    CAS  Google Scholar 

  20. Yamamoto K, Toya S, Sabidi S, et al. Diluted Luria-Bertani Medium vs. Sewage Sludge as Growth Media: Comparison of Community Structure and Diversity in the Culturable Bacteria[J]. Applied Microbiology and Biotechnology, 2021: 1–12

  21. Li DY, Ru KP, Wu J, et al. Rapid Detection of Bacteria by Spectrophotometric Method[J]. Analytical Chemistry, 2010, 38(4): 573–576

    CAS  Google Scholar 

  22. Han CC. Example Analysis of Microscope Direct Counting Method and Dilution Coating Plate Method[J]. Experimental Teaching and Instrumentation, 2016, 33(01): 32–34

    Google Scholar 

  23. Lv J, Zhang T. Experimental Guide to Microbiology[M]. Hefei: University of Science and Technology of China Press, 2018

    Google Scholar 

  24. Zhu FL, Hou Y. Comparative Study on the Crystal Structure of DC and Pulsed Electrodeposited Cu-nanoAl2O3 Composite Plating Layers[J]. Journal of Shaanxi Normal University: Natural Science Edition, 2010, 38(02): 46–49

    CAS  Google Scholar 

  25. Xue YW. Lambert-Beer Law and Light [J]. Industry and Technology Forum, 2013, 12: 106–107

    Google Scholar 

  26. **ao M, Yang F, Wang XR, et al. Establishment of a Spectrophotometric Method for the Determination of Staphylococcus Aureus Bacterial Concentration[J]. Advances in Animal Medicine, 2014, 35: 40–43

    Google Scholar 

  27. Yuan B, Liu G C, Xu L. Study on the Inactivation of SRB by Copper ion Biocides [J]. Corrosion and Protection, 2005, (05): 187–188+199

  28. Wu W, Zhao W, Wu Y, et al. Antibacterial Behaviors of Cu2O Particles with Controllable Morphologies in Acrylic Coatings[J]. Applied Surface Science, 2019, 465: 279–287

    Article  CAS  Google Scholar 

  29. Liu HT, Xu GH, Zhu GY. Research Progress of Advanced Water Treatment Technology[J]. Water Treatment Technology, 2008: 1–7+30

  30. Selim MS, Mo PJ, Hao Z, et al. Blade-like Structure of Graphene Oxide Sheets Decorated with Cuprous Oxide and Silicon Carbide Nanocomposites as Bactericidal Materials[J]. Journal of Colloid and Interface Science, 2020, 578: 698–709

    Article  CAS  Google Scholar 

  31. Yu H, Li Z, **a Y, et al. Effect of Copper Addition in Carbon Steel on Biocorrosion by Sulfate-reducing Bacteria in Solution[J]. Anti-Corrosion Methods and Materials, 2021, 68(4): 302–309

    Article  CAS  Google Scholar 

  32. Yu XY, Wang K, Chen ZT, et al. Study on the Exudation Rate and Degradation Behavior of Cuprous Oxide in Antifouling Coatings[J]. Coating Industry, 2012, 42: 45–48+5

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Hongqiang Chu  (储洪**).

Additional information

Conflict of interest

All authors declare that there are no competing interests.

Funded by the National Natural Science Foundation of China (Nos.52079048 and 52178203), the Natural Science Foundation of Jiangsu Province (BK20221503), and the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences (Z020012)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xu, Y., Xu, N., Guo, M. et al. Effect of Electrodeposition Methods of Cuprous Oxide on Antibacterial Properties of Concrete. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 38, 823–833 (2023). https://doi.org/10.1007/s11595-023-2765-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11595-023-2765-6

Key words

Navigation