Abstract
Plastic wastes in recent years have become a menace owing to population pressure and high demand of various plastic products in daily use. A study was conducted in Aizawl city of northeast India for a period of 3 years to quantify various types of plastic wastes. Our study found that a present plastic consumption of 13.06 g/capita/day although low when compared to developed countries continues; the generation will be doubled after a decade as the population is projected to double specially due to migration from rural areas. The plastic waste was contributed more by the high-income group of the population with a correlation factor of r = 0.97. Among the total plastic waste, packaging plastics contributed maximum with an average of 52.56% and carry bags among the packaging contribute maximum with 32.55% in the three sectors, namely, residential, commercial, and dum** sites. The result leads to a maximum contribution by the LDPE polymer with 27.46% among seven categories of polymers.
Similar content being viewed by others
Data availability
The paper contains all data. However, additional data may be provided upon reasonable requests from the corresponding author, after publication of the paper.
Code availability
Not applicable.
References
Aryan Y, Yadav P, Samdder SR (2018) Life cycle assessment of the existing and proposed plastic waste management options in India: A case study. J Clean Prod 211:1268–1283
Asgher M, Arshad S, Qamar SA, Khalid N (2020) Improved bio surfactant production from Aspergillus niger through chemical mutagenesis: characterization and RSM optimization. SN Appl Sci 2(5):1–11
ASTM D5231–92 (2016) Standard test method for determination of the composition of unprocessed municipal solid waste. ASTM, International
Census of India (2011) Mizoram: district census handbook. Office of the Registrar General and Census Commissioner, India
CPCB (2018)Life cycle assessment (LCA) study of plastic packaging products. Ministry of Environment, Forest and Climate Change. Government of India. 66 pp
CPCB (2019) Annual report for the year 2019–20 on implementation of plastic waste management rules. Central pollution control board.94 pp
Crawford C, Quinn B (2017) 7-The biological impacts and effects of contaminated microplastics. Microplastic Pollutants, Elsevier: Kidlington UK, P. 159–178
Evode N, Qamar SA, Bilal M, Barcelo D, Iqbal HNM (2021) Plastic waste and its management strategies for environmental sustainability. Case Studies in Chemical and Environmental Engineering 4:100142. https://doi.org/10.1016/j.cscee.2021.100142
Gourmelon G (2013) Global plastic production rises, recycling logs. Vital Sins 22(2015):91–95
Gwada B, Ogendi G, Makindi SM, Trott S (2019) Composition of plastic waste discarded by households and its management approaches. Glob J Environ Sci Manage 5:83–94. https://doi.org/10.22034/gjesm.2019.01.07
Halden RU (2010) Plastics and health risks. Annu Rev Public Health 31(1):179–194. https://doi.org/10.1146/annurev.publhealth.012809.103714
Harris ME, Walker B (2010) A novel, simplified scheme for plastics identification.ACS publications. J Chem Educ 87:38–52
Hartmann NB, Rist S, Bodin J, Jensen LHS, Schmidt SN, Mayer P, Meibom A, Baun A (2017) Microplastics as vectors for environmental contaminants: exploring sorption, desorption, and transfer to biota. Integ Environ Assess Manage 13:488–493
Hayen KW, Jaimys A, Russell K, Elena PI (2013) Plastic degradation and its environmental implications with special reference to poly(ethyleneterephthalate). Polym 5(1):1–18
Hopewell H, Robert DR, Edward KE (2009) Plastics recycling: challenges and opportunities. Philos Trans R Soc 364:2115–2126
Huq MST (2015) Environmental challenges of plastics waste in Bangladesh. Plastic waste management for sustainable urbanization in Asia: lessons from experiences of Japan. Asia Petrochemical Industry Conference. pp 1–44
Islam MS (2011) Prospects and challenges of plastic industries in Bangladesh. Journal of Chemical Engineering.16–21. https://doi.org/10.3329/jce.v26i1.10176
Keiko Y-O, Hiroshi M, Yuhji K, Atsushi S, Yoshiki T (2001) Degradation of polythene by a fungus, Pencillium simplicissimus YK. Plym Degrad Stabil 72:323–327
Kumar A, Samadder SR, Kumar N, Singh C (2018) Estimation of the generation rate of different types of plastic wastes and possible revenue recovery from informal recycling. Waste Manage 79:781–790. https://doi.org/10.1016/j.wasman.2018.08.045
Law KL, Thompson RC (2014) Microplastics in the seas. Science 345(6193):144–145. https://doi.org/10.1126/science.1254065
Li W, Qamar SA, Qamar M, Basharat A, Bilal M, Iqbal HM (2021) Carrgeenanam-based nano hybrid materials for the mitigation of hazardous environmental pollutants. Int J Bio lMacromol 190:700–712
Monjur M, Mahadi H, Fazlur R, Mohammad U (2017) Towards the effective plastic waste management in Bangladesh: a review. Environ Sci Pollu Res 24:27021–27046. https://doi.org/10.1007/s11356-017-0429-9
Noufal M, YuanyuanMaalla Z, Adipah S (2020) Determinants of household solid waste generation and composition in Homs City, Syria. Journal of Environmental and Public Health.1–15. https://doi.org/10.1155/2020/7460356
OECD (2022) Global plastics outlook: economic drivers, environmental impacts and policy options. OECD Publishing Paris. https://doi.org/10.1787/de747aef-en
Othman AR, Hasan HA, Muhamad MH et al (2021) Microbial degradation of microplastics by enzymatic process: a review. Envrion Chem Lett 19:3057–3073. https://doi.org/10.1007/s10311-021-01197-9
Plastics Europe https://plasticseurope.org
Putri AR, Takashi F, Masaki T (2018) Plastic waste management in Jakarta, Indonesia: evaluation of material flow and recycling scheme. J Mater Cycles Waste Manage 20:2140–2149. https://doi.org/10.1007/S10163-018-0753-2
Rafey A, Siddiqui FZ (2021) A review of plastic waste management in India- challenges and opportunities. Int J Environ Anal Chem. https://doi.org/10.1080/03067319.2021.1917560
Raynaud J (2014)Valuing plastics: the business case for measuring. Managing and disclosing plastic use in the consumer goods industry. UNEP, 116 pp. https://wedocs.unep.org/20.500.11822/9238
Schwabl P, Koppel S, Koppel S, Konigshofer P et al (2019) Detection of various microplastics in human stool: a prospective case series. Ann Intern Med 171:453–457. https://doi.org/10.7326/M19-0618
Seng B, Kaneko H, Hirayama K, Katayama HK (2011)Municipal solid waste management in Phnom Penh, capital city of Cambodia. Waste Management Research 29:491–500.1177/0734242X10380994
Thangjam U, Sahoo UK, Thong P, Sileshi GW (2019) Develo** tree volume equation for Parkia timoriana grown in homegardens and shifting cultivation areas of Northeast India. Forests, Trees Livelhoods,. https://doi.org/10.1080/14728028.2019.1624200
Thanh NP, Yasuhiro M, Takeshi F (2011) Assessment of plastic waste generation and its potential recycling of household solid waste in Can Tho City. Vietnam Environ Monitor Assess 175:23–35
UNEP (2009) Converting waste plastics into a resource. Assessment Guidelines, pp 73
Vethaak ADM, Leslie HA (2016) Plastic debris is a human health issue. Environ Sci Technol 50:6825–6826. https://doi.org/10.1021/acs.est.6bo2569
Wichai N, Chavalparit O (2019) 3Rs policy and plastic waste management in Thailand. J Mater Cycles Waste Manage 21:10–22. https://doi.org/10.1007/s10163-018-0781-y
Yaka M, Ehirchiou A, Alkandry TTS, Sair K (2015) Huge plastic bezoar: a rare case of gastrointestinal obstruction. Pan Afr Med J 21: 1–5, https://doi.org/pamj.2015.21.286.7169
Zhao Y, Qamar SA, Qamar M, Bilal M, Iqbal HM (2021) Sustainable remediation of hazardous environmental pollutants using biochar-based non-hybrid materials. J Environ Manage 300:113762
Acknowledgements
The authors wish to thank the households for their cooperation and sharing unbiased data that formed this research. Aizawl Municipality also provided some information pertaining to frequency of waste collection and location of dum** sites.
Author information
Authors and Affiliations
Contributions
APS conducted the field survey and data collection; ASD and UKS analyzed the data; APS, ASD, and UKS prepared the first draft; UKS revised the final draft; all authors have read the revised manuscript and participated in the final revision and agreed to submit the manuscript.
Corresponding author
Ethics declarations
Ethics approval
The research does not involve any animals and plants, and therefore, ethics approval is not applicable.
Consent to participate/publication
Yes.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Singh, A.P., Devi, A.S. & Sahoo, U.K. Quantifying plastic waste generation in Aizawl city, India: waste management and its impact on human and environmental health. Environ Sci Pollut Res 30, 107390–107402 (2023). https://doi.org/10.1007/s11356-023-27513-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-023-27513-0