The study analyzes experimental data on the temperature of the liquid metal prior to tap** from a steel making unit in a steel ladle and the metal temperature in a ladle depending on time under the assumption that experimental values are independent random variables. The maximum metal cooling rate observed at this stage was 3.16°C/min. The maximum cooling rate was shown to be caused by two factors, including the greatest heat loss by radiation from the open surface of the melt and the heating temperature of the steel ladle lining prior to the ladle filling with a liquid metal. A linear relationship is thus revealed between the melt cooling rate and the temperatures of the metal prior to tap** and of the steel ladle lining. In addition, the temperature and ladle time of a metal are linearly dependent. The theoretically calculated time of metal cooling to the assigned temperature is in satisfactory agreements with the experiment. Factors decreasing the metal cooling rate are established.
Similar content being viewed by others
References
A. S. El’darkhanov, A. S. Nuradinov, and V. N. Baranova, “Some aspects of applying external effects in continuous casting of the steel,” Stal’, No. 10, 17–20 (2015).
S. A. Botnikov, O. S. Khlybov, and A. N. Kostychev, “Development of forecasting the metal temperature in the steel ladle and tundish of the casting and rolling complex,” Stal’, No. 10, 7–12 (2019).
V. I. Timoshpol’skii and I. A. Trusova, “Improvement of the technology of long billet continuous casting. Methods of measuring temperature during solidification and cooling. Message 1,” Stal’, No. 11, 14–18 (2019).
A. V. Amelin, S. S. Shchipanov, A. V. Amelin, and D. B. Foigt, “Development of continuous steel casting in Evraz-ZSMK JSC,” Stal’, No. 7, 14–16 (2019).
Z. Han, Y. Li, M. Yang, Q. Yuan, L. Ba, and E. Xu, “Digital twin-driven 3D visualization monitoring and traceability system for general parts in continuous casting machine,” J. of Advanced Mechanical Design, Systems, and Manufacturing, 14, No. 7, 1–15 (2020).
J.-K. Yoon, “Applications of numerical simulation to continuous casting technology,” ISIJ Int., 48, No. 7, 879–884 (2008).
J. Ma, Z. **e, and G. Jia, “Applying of real-time heat transfer and solidification model on the dynamic control system of billet continuous casting,” ISIJ Int., 48, No. 12, 1722–1727 (2008).
C.-E. Grip, “Simple model for prediction of temperatures in an L-shaped tundish. Verification by continuous temperature measurements,” ISIJ Int., 38, No. 7, 704–713 (1998).
C.-M. Fan and W.-S. Hwang, “Mathematical modeling of fluid flow phenomena during tundish filling and subsequent initial casting operation in steel continuous casting process,” ISIJ Int., 40, No. 11, 1105–1114 (1998).
S. K. Vil’danov, “On the statistical variability of measurable objects appearing in the steel continuous casting,” Rasplavy, No. 1, 90–102 (2021).
R. Pardeshi, S. Basak, A. K. Singh, B. Basu, V. Mahashabde, S. K. Roe, and S. Kumar, “Mathematical modeling of the tundish of a single-strand slab caster,” ISIJ Int., 44, No. 9, 1534–1540 (2004).
G. I. Ivchenko and Yu. I. Medvedev, Mathematical Statistics [in Russian], Vysshaya Shkola Moscow (1984).
N. Johnson and F. Leone, Statistics and Experimental Design in Engineering and the Physical Sciences. Methods of Data Processing [in Russian], Mir, Moscow (1980).
P. P. Bocharov and A. V. Pechenkin, Mathematical Statistics [in Russian], Izd-vo Rossiiskogo Un-ta Druzhby Narodov, Moscow (1994).
S. K. Vil’danov, “Assessing the effectiveness of applying a refractory heat-insulating mixture in a steel-smelting ladle,” Ogneupory i Tekhnicheskaya Keramika, No. 6, 10–19 (2019).
S. K. Vil’danov, L. V. Rogaleva, P. I. Chernousov, and G. V. Torokhov, “Calculation of heat losses during transportation and casting of liquid cast iron with the application of a heat-insulating mixture,” Stal’, No. 2, 67–71 (2021).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 66, No. 5, pp. 25–29, May, 2022. Russian DOI: https://doi.org/10.52351/00260827_2022_05_25.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Vil’danov, S.K., Rogaleva, L.V., Chernousov, P.I. et al. Evaluating the Effects of Certain Process Parameters on the Metal Cooling Rate in a Steel Ladle. Metallurgist 66, 518–524 (2022). https://doi.org/10.1007/s11015-022-01355-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-022-01355-6