Abstract
The effects of added nanoparticles (i.e., Al2O3 and TiO2) on the thermal, microstructural and mechanical properties of Sn3.5Ag0.5Zn nanocomposite solders have been investigated. Adding nanoparticles to the Sn3.5Ag0.5Zn solder increases the melting temperature by only 2.1–4.6 °C. It was also confirmed that the nanoparticles affect the microstructural and mechanical properties. The UTS, 0.2 YS, and microhardness of the Sn3.5Ag0.5Zn nanocomposite solder improved, which could be attributed to the refinement of the β-Sn grain size, the precipitation of Ag3(Sn, Zn) grains, and the second phase dispersion strengthening mechanism. The fracture mechanism of Sn3.5Ag0.5Zn nanocomposite solders was confirmed to be the ductile fracture mode. The cracks were initiated at the interfaces between β-Sn(Zn) grains and Ag(Zn, Sn) phases.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig2_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig3_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig7_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig8_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-017-8354-8/MediaObjects/10854_2017_8354_Fig9_HTML.jpg)
Similar content being viewed by others
References
H.J. Lin, T.H. Chuang, Interfacial microstructure and bonding strength of Sn-3Ag-0.5Cu and Sn-3Ag-0.5Cu-0.5Ce-XZn solder BGA packages with immersion Ag surface finish. Microelectron. Reliab. 51, 445–452 (2011)
L.C. Tsao, R.W. Wu, T.H. Cheng, K.H. Fan, R.S. Chen, Effects of nano-Al2O3 particles on microstructure and mechanical properties of Sn3.5Ag0.5Cu composite solder ball grid array joints on Sn/Cu pads. Mater. Des. 50, 774–781 (2013)
N.C. Lee, Lead-free soldering. Mater. Adv. Packag. 199–236 (2016)
C.L. Chuang, L.C. Tsao, H.K. Lin, L.P. Feng, Effects of small amount of active Ti element additions on microstructure and property of Sn3.5Ag0.5Cu solder. Mater. Sci. Eng. A 558, 478–484 (2012)
S.K. Kang, W.K. Choi, D.Y. Shih, D.W. Henderson, T. Gosselin, A. Sarkhel, N.Y. Charles Goldsmith, K.J. Puttlitz, W.K. Choi, Ag3Sn plate formation in the solidification of near-ternary eutectic Sn-Ag-Cu. JOM 55, 61–65 (2003)
S.W. Jeong, J.H. Kim, H.M. Lee, Effect of cooling rate on growth of the intermetallic compound and fracture mode of near-eutectic Sn-Ag-Cu/Cu pad: before and after aging. J. Electron. Mater. 33, 1530–1544 (2004)
W.M. **ao, Y.W. Shi, Y.P. Lei, Z.D. **a, F. Guo, Comparative study of microstructures and properties of three valuable SnAgCuRE lead-free solder alloys. J. Electron. Mater. 35, 1095–1103 (2006)
C. Wei, Y.C. Liu, Y.J. Han, J.B. Wan, K. Yang, Effects of aging on structural evolution of the rapidly solidified Sn-Ag-Zn eutectic solder. J. Alloys Compd. 468, 154–157 (2009)
M. McCormack, S. **, G.W. Kammlott, H.S. Chen, New Pb-free solder alloy with superior mechanical properties. Appl. Phys. Lett. 63, 15–17 (1993)
S. Knott, H. Flandorfer, A. Mikula, Calorimetric investigations of the two ternary systems Al-Sn-Zn and Ag-Sn-Zn. Z. Metallkd. 96, 38–44 (2005)
L.C. Tsao, S.Y. Chang, C.I. Lee, W.H. Sun, C.H. Chiang, Effects of nano-Al2O3 additions on microstructure development and hardness of Sn3.5Ag0.5Cu solder. Mater. Des. 31, 4831–4835 (2010)
L.C. Tsao, S.Y. Chang, Effects of nano-TiO2 additions on thermal analysis, microstructure and tensile properties of Sn3.5Ag0.25Cu solder. Mater. Des. 31, 990–993 (2010)
T.H. Chuang, L.C. Tsao, C.H. Chung, S.Y. Chang, Evolution of Ag3Sn compounds and microhardness of Sn3.5Ag0.5Cu nano-composite solders during different cooling rate and aging. Mater. Des. 39, 475–483 (2012)
C.H. Huang, C.H. Chen, S.Y. Chang, L.C. Tsao, R.S. Chen, Effect of TiO2 nanoparticle addition and cooling rate on microstructure and mechanical properties of novel Sn1.5Sb0.7Cu solders. J. Mater. Sci.: Mater. Electron. 26, 3493–3501 (2015)
K. Mohan Kumar, V. Kripesh, A.A.O. Tay, Single-wall carbon nanotube (SWCNT) functionalized Sn-Ag-Cu lead-free composite solders. J. Alloys Compd. 450, 229–237 (2008)
X. Wang, Y.C. Liu, C. Wei, H.X. Gao, P. Jiang, L.M. Yu, Strengthening mechanism of SiC-particulate reinforced Sn-3.7Ag-0.9Zn lead-free solder. J. Alloys Compd. 480, 662–665 (2009)
Y. Gu, X.C. Zhao, Y. Li, Y. Liu, Y. Wang, Z.Y. Li, Effect of nano-Fe2O3 additions on wettability and interfacial intermetallic growth of low-Ag content Sn-Ag-Cu solders on Cu substrates. J. Alloys Compd. 627, 39–47 (2015)
A. Sharma, B.G. Baek, J.P. Jung, Influence of La2O3 nanoparticle additions on microstructure, wetting, and tensile characteristics of Sn-Ag-Cu alloy. Mater. Des. 87, 370–379 (2015)
F. Tai, F. Gao, Z.D. **a, Y.P. Lei, Y.W. Shi, Effects of nano-structured particles on microstructure and microhardness of Sn-Ag solder alloy. J. Mater. Sci. Mater. Electron. 21, 702–707 (2010)
L.M. Yang, Z.F. Zhang, Effect of Y2O3 nanoparticles addition on the microstructure and tensile strength of Cu/Sn3. 0Ag0. 5Cu solder joint. J. Appl. Phys. 117, 015308 (2015)
A.E. Hammad, A.A. Ibrahiem, Enhancing the microstructure and tensile creep resistance of Sn-3.0Ag-0.5Cu solder alloy by reinforcing nano-sized ZnO particles. Microelectron. Reliab. 75, 187–194 (2017)
T. Fouzder, I. Shafiq, Y.C. Chan, A. Sharif, W.K.C. Yung, Influence of SrTiO3 nano-particles on the microstructure and shear strength of Sn-Ag-Cu solder on Au/Ni metallized Cu pads. J. Alloys Compd. 509, 1885–1892 (2011)
L. Zhang, K.N. Tu, Structure and properties of lead-free solders bearing micro and nanoparticles. Mater. Sci. Eng. R82, 1–32 (2014)
L.C. Tsao, Evolution of nano-Ag3Sn particle formation on Cu-Sn intermetallic compounds of Sn3.5Ag0.5Cu composite solder/Cu during soldering. J. Alloys Compd. 509, 2326–2333 (2011)
L.C. Tsao, Suppressing effect of 0.5 wt% nano-TiO2 addition into Sn-3.5Ag-0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging. J. Alloys Compd. 509, 8441–8448 (2011)
W.Q. **ng, X.Y. Yu, H. Li, L. Ma, W. Zuo, P. Dong, W.X. Wang, M. Ding, Effect of nano Al2O3 additions on the interfacial behavior and mechanical properties of eutectic Sn-9Zn solder on low temperature wetting and soldering of 6061 aluminum alloys. J. Alloy Compd. 695, 574–582 (2017)
L.C. Tsao, C.H. Huang, C.H. Chung, R.S. Chen, Influence of TiO2 nanoparticles addition on the microstructural and mechanical properties of Sn0.7Cu nano-composite solder. Mater. Sci. Eng. A 545, 194–200 (2012)
P. Liu, P. Yao, J. Liu, Effect of SiC nanoparticle additions on microstructure and microhardness of Sn-Ag-Cu solder alloy. J. Electron. Mater. 37, 874–879 (2008)
H. Ohtani, M. Miyashita, K. Ishida, Thermodynamic study of phase equilibria in the Sn-Ag-Zn system. J. Jpn. Instrum. Methods 63, 685–694 (1999)
U.B.öyükS. Engin, H. Kaya, N. Maraşlı, Effect of solidification parameters on the microstructure of Sn-3.7Ag-0.9Zn solder. Mater. Charact. 61, 1260–1267 (2010)
G.P. Vassilev, E. Dobrev, S. Evtimova, J.C. Tedenac, Studies of the phase equilibria in the Ag–Sn–Zn system. J. Alloy Compd. 327, 285–291 (2001)
I. Ohnuma, M. Miyashita, X.J. Liu, H. Ohtani, K. Ishida, Phase equilibria and thermodynamic properties of Sn-Ag based Pb-free solder alloys. IEEE Trans. Electron. Packag. Manuf. 26, 84–89 (2003)
C. Wei, Y.C. Liu, Y.J. Han, J.B. Wan, K. Yang, Microstructures of eutectic Sn-Ag-Zn solder solidified with different cooling rates. J. Alloys Compd. 464, 301–305 (2008)
S. Engin, U. Böyük., N. Maraşlı, Determination of solid-liquid interfacial energy for a solid Sn in equilibrium with a Sn-Ag-Zn eutectic liquid. Curr. Appl. Phys. 11, 1060–1066 (2011)
S.M.L. Nai, J. Wei, M. Gupta, Improving the performance of lead-free solder reinforced with multi-walled carbon nanotubes. Mater. Sci. Eng. A 423, 166–169 (2006)
A.A. El-daly, S.F. Fawzy, M.J. Mansour, Younis, Thermal analysis and mechanical properties of Sn-1.0Ag-0.5Cu solder alloy after modification with SiC nano-sized particles. J. Mater. Sci.: Mater. Electron. 24, 2976–2988 (2013)
J.M. Song, J.J. Lin, C.F. Huang, H.Y. Chuang, Crystallization, morphology and distribution of Ag3Sn in Sn-Ag-Cu alloys and their influence on the vibration fracture properties. Mater. Sci. Eng. A 466, 9–17 (2007)
Acknowledgements
The authors acknowledge the financial support of this work from the Ministry of Science and Technology, Taiwan, under Project No. MOST 106-2221-E-020-015. SEM was performed by the Precision Instrument Center of National **tung University of Science and Technology, Taiwan.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chuang, C.L., Tsao, L.C. Effects of nanoparticles on the thermal, microstructural and mechanical properties of novel Sn3.5Ag0.5Zn composite solders. J Mater Sci: Mater Electron 29, 4096–4105 (2018). https://doi.org/10.1007/s10854-017-8354-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-017-8354-8