Abstract
A passively Q-switched laser with a nonlinear mirror on the basis of stimulated Brillouin scattering (SBS), generates bursts of pulses with a few 10 ns pulse duration and a separation between 20–90 μs. Percussion drilling and trepanning are performed in different materials with 1 mm thickness. The optimum parameter set of these pulse trains with regard to the burr height and ablation rate is investigated. Differences in the processing results between single pulse and multi pulse structures are discussed. In addition the laser allowed for transiently mode locked operation. Results for mode locked and merely Q-switched operation were compared.
Similar content being viewed by others
References
M. Ostermeyer, R. Menzel: Laser Resonators with Brillouin Mirrors, In: Phase Conjugate Laser Optics, Chapt. 2, ed. by A. Brignon, J.P. Huignard (Wiley-Interscience, New York 2003)
S.G. Gornyi, A.M. Grigor’ev, M.I. Patrov, V.D. Solov’ev, G.A. Turichin: Quantum Electron. 32, 929 (2002)
C. Lehane, H.S. Kwok: Appl. Phys. A 73, 45 (2001)
D.K.Y. Low, L. Li, P.J. Byrd: Opt. Lasers Eng. 35, 149 (2001)
A. Semerok, C. Dutouquet: Thin Solid Films 453–454, 501 (2004)
A. Sattmann, V. Sturm, R. Noll: J. Phys. D 28, 2181 (1995)
B.N. Chichkov, C. Moma, S. Nolte, F. Alvensleben, A. Tünnermann: Appl. Phys. A 63, 109 (1996)
M. Ostermeyer, K. Mittler, R. Menzel: Phys. Rev. A 59, 3975 (1999)
P. Kappe, M. Ostermeyer, R. Menzel: Appl. Phys. B. 80, 49 (2005)
Author information
Authors and Affiliations
Corresponding author
Additional information
PACS
79.20.Ds; 42.62.Cf; 42.60.By
Rights and permissions
About this article
Cite this article
Ostermeyer, M., Kappe, P., Menzel, R. et al. Laser drilling in thin materials with bursts of ns-pulses generated by stimulated Brillouin scattering (SBS). Appl. Phys. A 81, 923–927 (2005). https://doi.org/10.1007/s00339-005-3301-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-005-3301-6