Abstract
Automobile shock absorber bushings are hollow rotational parts in high demand, and rolling forming processes were investigated to increase productivity, reduce costs and improve the working environment. Based on simulation analysis, it was found that skew rolling is more suitable for the forming of automobile shock absorber bushings than cross wedge rolling; skew rolling could obtain a good workpiece outline and a regularly distributed inner hole, and the simulation results were verified by rolling experiments. By analysing the metal flow and strain field of the workpiece in a single ridge skew rolling process, the reasons for the insufficient wall thickness and annular groove defect in the inner hole of the protruding step were revealed. A double-ridge local thickening method is proposed to improve the tool design of the skew rolling process. The local thickening principle of the double ridges is analysed, and the parameters of the tool design are optimized.
Similar content being viewed by others
Data availability
The datasets generated and/or analysed during the current study are available from the corresponding author on reasonable request.
References
Hu ZH, Yang CP, Wang BY (2012) Development of part rolling technology in China. J Mech Eng 48:8–12. https://doi.org/10.3901/JME.2012.18.007
Urankar S, Lovell M, Morrow C, Li Q, Kawada K (2006) Establishment of failure conditions for the cross-wedge rolling of hollow shafts. J Mater Process Technol 177:545–549. https://doi.org/10.1016/j.jmatprotec.2006.04.052
Bartnicki J, Pater Z (2004) The aspects of stability in cross-wedge rolling processes of hollow shafts. J Mater Process Technol 155–156:1867–1873. https://doi.org/10.1016/j.jmatprotec.2004.04.278
Bartnicki J, Pater Z (2005) Numerical simulation of three-rolls cross-wedge rolling of hollow shaft. J Mater Process Technol 164–165:1154–1159. https://doi.org/10.1016/j.jmatprotec.2005.02.120
Yang CP, Hu ZH (2015) Research on the ovality of hollow shafts in cross wedge rolling with mandrel. Int J Adv Manuf Technol 83:67–76. https://doi.org/10.1007/s00170-015-7478-3
Yang CP, Ma JW, Hu ZH (2017) Analysis and design of cross wedge rolling hollow axle sleeve with mandrel. J Mater Process Technol 239:346–358. https://doi.org/10.1016/j.jmatprotec.2016.09.002
Huang X, Wang BY, Mu YH, Shen JX, Li JL, Zhou J (2019) Investigation on the effect of mandrels on hollow shafts in cross wedge rolling. Int J Adv Manuf Technol 102:443–455. https://doi.org/10.1007/s00170-018-3093-4
Shen JX, Wang BY, Zhou J, Huang X, Li JL (2019) Numerical and experimental research on cross wedge rolling hollow shafts with a variable inner diameter. Arch Civ Mech Eng 4:1497–1510. https://doi.org/10.1016/j.acme.2019.08.003
Pater Z, Bulzak T, Tomczak J (2016) Numerical analysis of a skew rolling process for producing a stepped hollow shaft made of titanium alloy Ti6Al4V. Arch Metall Mater 61:677–681. https://doi.org/10.1515/amm-2016-0115
Cao XQ, Wang BY, Zhou J, Shen JX (2022) Application of unified constitutive model of 34CrNiMo6 alloy steel and microstructure simulation for flexible skew rolling hollow shafts. J Manuf Process 76:598–610. https://doi.org/10.1016/j.jmapro.2022.02.021
**ong Y, Sun SH, Li Y, Zhao J, Lv ZQ, Zhao DL, Zheng YZ, Fu WT (2006) Effect of warm cross-wedge rolling on microstructure and mechanical property of high carbon steel rods. Mater Sci Eng A 431:152–157. https://doi.org/10.1016/j.msea.2006.05.148
Bulzak T, Pater Z, Tomczak J, Majerski K (2020) Hot and warm cross-wedge rolling of ball pins—comparative analysis. J Manuf Process 50:90–101. https://doi.org/10.1016/j.jmapro.2019.12.001
Huo YM, He T, Wang BY, Zheng ZH, Xue Y (2020) Numerical prediction and experimental validation of the microstructure of bearing steel ball formation in warm skew rolling. Metall Mater Trans A 51A:1254–1263. https://doi.org/10.1007/s11661-019-05589-z
Funding
This work is supported by the National Key R&D Program of China (Grant No. 2018YFB1307900) and the Engineering Research Center of Part Near-Net-Shape Forming, Ministry of Education.
Author information
Authors and Affiliations
Contributions
WS: conceptualization, investigation, methodology, data curation, writing—original draft, reviewing and editing. ZZ: supervision, methodology, reviewing and editing. PF: supervision, methodology, reviewing and editing. CY: supervision, conceptualization, methodology, resources, funding acquisition, reviewing and editing.
Corresponding author
Ethics declarations
Ethical approval
The article follows the guidelines of the Committee on Publication Ethics (COPE) and involves no studies on human or animal subjects.
Consent to participate
Applicable.
Consent for publication
Applicable.
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Sun, W., Zheng, Z., Feng, P. et al. Optimization of the rolling forming process for an automobile shock absorber bushing. Int J Adv Manuf Technol 124, 2483–2492 (2023). https://doi.org/10.1007/s00170-022-10656-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-022-10656-8