Abstract
The present paper reports the detailed study on the splicing behavior of viscose staple fiber yarns made from ring, rotor, friction and air-jet spinning technologies. The linear density of all the yearns was kept constant at 29.5 tex. The splicing parameters like splicing pressure and duration of the splicing were taken as variables. Three levels of splicing pressure at constant splicing duration and three levels of splicing durations at constant splicing pressure were considered. Splices were introduced at all these levels for the four different technologies. These splices were tested for their tensile properties and the properties of splices were evaluated in terms of retained splice strength (RSS) and splice break ratio (SBR). The splice photographs were taken and splices were analyzed for their structure and for diameter profile along the length of the splice.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
R. C. D. Kaushick, P. K. Hari, and I. C. Sharma,Text. Res. J.,58(5), 263 (1988).
R. C. D. Kaushick, P. K. Hari, and I. C. Sharma,Text. Res. J.,58(6), 343 (1988).
R. C. D. Kaushick, P. K. Hari, and I. C. Sharma,Text. Res. J.,57(8), 490 (1987).
R. Mashaly, E. El-Helw, and K. Akl,Indian Textile J.,60 (1990).
K. P. S. Cheng, K. K. Chan, Y. L. How, and H. L. I. Lam,Textile Asia,28(5), 45 (1997).
K. P. S. Cheng and H. L. I. Lam,Text. Res. J.,70(3), 243 (2000).
K. P. S. Cheng and H. L. I. Lam,Text. Res. J.,70(12), 1053 (2000).
S. K. Chattopadayay, P. Bhaskar, and R. K. Jadhav,Asian Textile J.,9(5), 44 (2000).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Das, A., Ishtiaque, S.M. & Nagaraju, V. Study on splicing performance of different types of staple yarns. Fiber Polym 5, 204–208 (2004). https://doi.org/10.1007/BF02903000
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02903000