Abstract
The ratio of the standard deviations of oscillations in the corrosion potential and open-circuit current about their mean values has been used lately for calculating the noise polarization resistance (R p, noise ). In this work, the ability of this method to obtain quantitative information on the corrosion rate of steel reinforcements embedded in concrete was analysed. In addition, the discriminating capacity of electrochemical noise as regards active and passive zones in reinforcements containing both was investigated.
Résumé
Le rapport des écarts types sur la valeur moyenne des oscillations du potentiel de corrosion et de l'intensité du courant en circuit ouvert a été utilisé récemment pour le calcul de la résistance de polarisation du bruit (R p, noise ). Dans cet article, on analyse l'utilisation de cette méthode pour obtenir des informations quantitatives sur le taux de corrosion des armatures enrobées dans du béton. On analyse également dans quelle mesure le bruit électrochimique peut différencier les zones actives et passives des armatures.
Similar content being viewed by others
References
Bertocci, U. and Huet, F., ‘Noise analysis applied to electrochemical systems,’Corrosion 51 (2) (1995) 131–144.
Legat, A. and Dolecek, V., ‘Corrosion monitoring system based on measurements and analysis of electrochemical noise,’Corrosion 51 (4) (1995) 295–300.
Eden, D.A. and Rothwell, A.N., ‘Electrochemical noise data: Analysis interpretation and presentation’, in CORROSION'92, NACE, Houston, Texas, USA, 1992.
Magaino, S., ‘Corrosion-system noise analysis advances’,Corr. Eng. 37 (11) (1988) 629–635.
Fukuda, T. and Mizuno, T., ‘The evaluation of pitting corrosion from the spectrum slope of noise fluctuation on iron and 304 stainless steel electrodes,’Corr. Sci. 38 (7) (1996) 1085–1091.
Gabrielli, C. and Keddam, M., ‘Review of applications of impedance and noise analysis to uniform and localized corrosion’,Corrosion 48 (10) (1992) 794–811.
**ao, H. and Mansfeld, F., ‘Evaluation of coating degradation with electrochemical impedance spectroscopy and electrochemical noise analysis,’J. Electochem. Soc. 141 (9) (1994) 2332–2337.
Mansfeld, F. and **ao, H., ‘Electrochemical noise analysis of iron exposed to NaCl solutions of different corrosivity,’J. Electrochem. Soc. 140 (8) (1993) 2205–2209.
Uruchurtu, J.C. and Dawson, J.L., ‘Noise analysis of pure aluminum under different pitting conditions,’Corrosion 43 (1) (1987) 19–25.
Kelly, R.G., Yuan, J., Hudson, J.L. and Inman, M.E., ‘Characterization of corrosion phenomena using the electrochemical noise resistance and the pitting index’, 187th Electrochemical Society Meeting, Reno, Nevada, USA, May 23, 1995.
Lumsden, J.B., Kendig, M. and Jeanjaquet, S., ‘Electrochemical noise for carbon steel in sodium chloride solutions—Effect of choride and oxygen activity’, Paper 224, in “CORROSION'92” NACE, Houston, Texas, USA, 1982.
Searson, P.C., Dawson, J.L. and John, D.G., ‘A.C. impedance and electrochemical noise measurements on reinforcing bars in concrete’, presented at UMIST Conference on ‘Electrochemical methods in corrosion testing and research’, 5 January, 1982.
Metikos-Hukovic, M., Loncar, M. and Zevnik, C., ‘Monitoring the electrochemical potential noise produced by coated metal electrodes’,Werkst. Korros. 40 (8) (1989) 494–499.
Gabrielli, C., Huet, F., Keddam, M. and Oltra, R., ‘A review of the probabilistic aspects of localized corrosion,’Corrosion 46 (4) (1990) 266–278.
Loto, C.A. and Cottis, R.A., ‘Electrochemical noise generation during stress corrosion cracking of alpha-brass,’Corrosion 43 (8) (1987) 499–504.
Cottis, R.A. and Loto, C.A., ‘Electrochemical noise generation during SCC of a high-strength carbon steel,’Corrosion 46 (1) (1990) 12–19.
Hardon, R.G., Lambert, P. and Page, C.L., ‘Relationship between electrochemical noise and corrosion rate of steel in salt contaminated concrete,’Br. Corros. J. 23 (4) (1988) 225–228.
Videm, K. and Myrdal, R., “Phenomena that disturb corrosion monitoring of steel reinforcement in concrete”, Paper 180, 13th International Corrosion Conference, Melbourne, Australia, November 1996.
Eden, D.A., Hladky, K., John, D.J. and Dawson, J.L., ‘Electrochemical noise—Simultaneous monitoring of potential and current signals from corroding electrodes’, Paper 274, CORROSION'86, NACE, Houston, Texas, USA, 1986.
Searson, P.C. and Dawson, J.L., ‘Analysis of electrochemical noise generated by corroding electrodes under open-cicuit conditions’,J. Electrochem. Soc. 135 (8) (1988) 1908–1915.
González, J.A., Feliu, S., Rodríguez, P., López, W., Ramírez, E., Alonso, C. and Andrade, C., ‘Some questions on the corrosion of steel in concrete. Part II: Corrosion mechanism and monitoring, service life, prediction and protection methods,’Mater. Struct. 29 (3) (1996) 97–104.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mariaca, L., Bautista, A., Rodríguez, P. et al. Use of electrochemical noise for studying the rate of corrosion of reinforcements embedded in concrete. Mat. Struct. 30, 613–617 (1997). https://doi.org/10.1007/BF02486903
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02486903